How To Clean Idylis Air Purifier

Lowe's - Idylis Air Purifier (Models 100, 125, 150) Product Demo

Idylis Air Purifier (Models 100, 125, 150) Intro

See Flash demo for product images and multimedia.

Idylis Air Purifier (Models 100, 125, 150) Control Panel

• View 1

  • Power Button:

    Turns unit ON or OFF.

    To turn unit OFF, hold button down for two seconds.

  • Filter Change Indicator:

    A corresponding light will illuminate when either the HEPA Filter, Carbon Pre-Filter or both filters require changing.

  • Filter Replacement RESET Button:

    AFTER replacing the filters, press the Filter Reset Button with a pointed tool to reset the Filter Change Indicator.

  • Airflow SPEED Selection Button:

    Use the Speed Selection Button to choose the desired airflow speed, from LOW to MEDIUM to HIGH.

    Each time the button is pressed, the fan speed is increased. The indicator light will show the selected speed.

  • TIMER Button:

    When the timer button is pressed, the desired run time can be selected in the order: "2 hour, 4 hour, 8 hour."

Idylis Air Purifier (Models 100, 125, 150) 360/Zoom

See Flash demo for product images and multimedia.

Idylis Air Purifier (Models 100, 125, 150) Replacing Carbon Pre Filter

• Step 1

  Open the front cover.

• Step 2

  Separate the filter case from the product, and then remove the filter.

• Step 3

  First, remove the replacement Carbon Pre-Filter from the plastic packaging.

  Then cut the filter into the proper size using the filter frame as a guide. Replace any remaining filter material in a resealable plastic bag to store for future use.

  Put the new filter on the HEPA filter and push the fastening material area of the frame.

• Step 4

  Insert the filter assembly back into the unit.

• Step 5

  To reinstall the front cover, place the bottom tabs on the front cover into the slots at the bottom of the product. Push the top of the front cover toward the product until the front cover locks into place.

  NOTE: Unit will not turn on if the cover is not installed properly.

• Step 6

  With the power ON, press the filter replacement RESET button with a pointed tool.

Idylis Air Purifier (Models 100, 125, 150) Replacing HEPA Filter

• Step 1

  Open the front cover.

• Step 2

  Separate the filter case from the product.

• Step 3

  First, remove the new HEPA filter from the plastic packaging. Then place the new Carbon Pre-Filter on the HEPA filter and attach the Carbon Pre-Filter to the fastening material area of the frame.

• Step 4

  Insert the filter assembly in the unit. Make sure that the tabs on the HEPA filter are not being covered by anything and are facing out, so they are easily access next time.

• Step 5

  To reinstall the front cover, place the bottom tabs on the front cover into the slots at the bottom of the product. Push the top of the front cover toward the product until the front cover locks into place.

  NOTE: Unit will not turn on if the cover is not installed properly.

• Step 6

  With the power ON, press the filter replacement RESET button with a pointed tool.

• Cleaning Your HEPA Filter (optional)

  To extend the life of your HEPA filter, periodically clean the filter with a vacuum cleaner. Do not use any aerosol liquid cleaners on the filter at any time.

How To Clean Idylis Air Purifier

Source: http://webapps.easy2.com/cm2/flash/generic_index.asp?page_id=35905793

Posted by: tanwhistalcup.blogspot.com

Share this post